Hub Charger With Power Switch

Product Detailed Description

A rectangular shell with a port row along its front face houses the electronics behind a smooth top panel carrying a molded power button. Cables enter through an input on the rear, splitting inside to a series of downstream sockets arrayed edge to edge. A desk-side worker presses the top button to send current through every port, then feeds each device a matching plug from the row without reaching behind the unit. When the work session ends, pressing the same button drops all sockets to standby while the mains line stays connected.

• A molded power button on top lets a desk-side worker cut output to every port with a single press without unplugging the mains cable
• The hub row branches an input line into several downstream sockets, clearing desk clutter that a tangle of separate adapters would create
• A reversible oval socket at the end of the port row lets a worker plug a cable without checking which side faces up
• A slim rectangular shell with rounded corners rests flush against a counter surface, holding position even when attached cables pull sideways
• All ports align along the same face, letting a retailer display every socket in a glass case without turning the unit